What should we pay attention to when we use glass machinery?
When using glass machinery, we need to pay special attention to the following points to ensure the safety of operation and the normal operation of the equipment:
Be familiar with the equipment and operating procedures:
Before operation, you should carefully read the equipment's instruction manual to understand the equipment's structure, performance and basic principles.
Be familiar with the equipment's operating procedures, including settings, adjustments, maintenance and repair techniques.
Wear safety protection equipment:
Wear relevant safety protection equipment, such as gloves, earplugs, protective shoes, protective clothing, etc.
Make sure that the clothes are not loose and do not wear jewelry that may get stuck in the equipment.
Check the equipment status:
Before starting the machine, carefully check whether all parts of the equipment are normal, including power cords, instruments, blades, rollers, transmission belts, etc.
Pay attention to the sound and operation of the machine. If there is any abnormality, stop the operation and power off in time.
Keep the equipment clean:
Always keep the glass machinery and equipment clean to prevent dust from entering the chemical reaction or mechanical operation to affect the equipment.
Clean the equipment regularly to reduce the occurrence of faults and extend the service life of the equipment.
Reasonable operation:
Reasonably place and adjust the glass according to the different materials and sizes of the glass to maintain stability and stability.
Use the cutting machine correctly to avoid damage and danger.
Daily maintenance and care:
Regularly lubricate, clean, and inspect the electrical and mechanical parts of the equipment.
Maintain the equipment according to the maintenance cycle, such as changing lubricating oil, cleaning filters, etc.
Comply with safe operating procedures:
Implement a fixed person mechanism and use the equipment with an operator certificate.
Comply with the handover system and fill in the handover record.
Immediately stop and check if any abnormality is found, and notify relevant personnel in time if the problem cannot be handled.
Special attention:
When operating the glass cutting machine, pay special attention to the quality and integrity of the glass, and avoid using cracked or defective glass.
Before cutting a large amount of glass, check the performance of the cutting machine to ensure good cutting results.
By following the above precautions, we can effectively reduce safety hazards when using glass machinery, improve production efficiency, and extend the service life of the equipment.